TURBOSOUND NUQ115B
- Front loaded subwoofer for portable PA applications
- 400 Watts continuous, 1,600 Watts peak power
- Double suspension 15″ low frequency driver with inside/outside wound coil
- Low distortion bass reflex port design
TURBOSOUND NUQ102-AN
- 2 way full range powered loudspeaker for portable PA and installation applications
- 600 Watt power featuring Klark Teknik Class-D technology
- Klark Teknik Digital Signal Processing for total system control
- ULTRANET digital audio networking connects to mixers and other sources
- 10″ low frequency driver with low mass voice coil for improved transient response
TURBOSOUND NUQ102
- ลำโพง 10 นิ้ว 2 ทางสำหรับ PA แบบพกพา และงานติดตั้ง
- ทนกำลังขับสูงสุด 1,200 วัตต์
- มุมการกระจายเสียง 100 ° H x 60 ° V
- ตัสตูทำจากไม้อัดเบิร์ชหนา 12 มม. (1/2″) เคลือบด้วยสีดำกึ่งด้าน
- ตัวยึดและที่จับเสา 35 มม
- ตัวเชื่อมต่อ Neutrik speakON * NL4
TURBOSOUND NUQ82
- 2 way full range loudspeaker for portable PA and installation applications
- 250 Watts continuous, 1,000 Watts peak power
- Ideal for FOH, side fill and monitor applications
- 8″ low frequency driver with low mass voice coil for improved transient response
- Aluminium dome 1″ neodymium motor compression driver
TURBOSOUND NUQ62
- ลำโพงฟูลเรนจ์ 2 ทางสำหรับแอพพลิเคชั่นการติดตั้ง PA แบบพกพา
- 150W ต่อเนื่องกำลังไฟสูงสุด 600W
- เหมาะสำหรับการกรอกข้อมูลด้านหน้าและการตรวจสอบการใช้งาน
- ไดรเวอร์ความถี่ต่ำ 5″ พร้อมวอยซ์คอยล์มวลต่ำเพื่อการตอบสนองชั่วคราวที่ดีขึ้น
- โดมอะลูมิเนียมพร้อมตัวขับบีบอัดมอเตอร์นีโอดิเมียม 1″
- ท่อนำคลื่นวงรีที่หมุนได้แบบหมุนได้ให้การกระจาย 100 ° H x 60 ° V
POWERSPACE P21000A 230V EU
- 1000 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems
- Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging
- I-Share output delivers 2x power level by combining the current of both channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
POWERSPACE P4300A 230V EU
- 4 x 300W at 70/100V & 4/8 Ohms
- 8 x Digital AmpLink, 4 x Analog Inputs
- 8 x Digital AmpLink, 4 x Speaker Outputs
POWERSPACE P4300+ 230V EU
- 300 watts per channel and works seamlessly with Bose loudspeakers and controls to create complete commercial sound systems
- Built-in DSP, including SmartBass processing, routing, level control, delays, limiters, Bose loudspeaker EQs, plus input and area EQs
- PowerSpace configuration utility facilitates setup with an integrated webserver and intuitive browser-based UI, including real-time control with signal and thermal monitoring
- Opti-voice paging provides a smooth transition between music and announcements
- Integrated features to simplify commercial installations: Dedicated input for 600-ohm telephone or mic paging, independent 600-ohm music-on-hold and line-level aux outputs, and a NO/NC mute connection
POWERSPACE P4150+ 230V EU
- 150 watts per channel and works seamlessly with Bose loudspeakers and controls to create complete commercial sound systems
- Built-in DSP, including SmartBass processing, routing, level control, delays, limiters, Bose loudspeaker EQs, plus input and area EQs
- PowerSpace configuration utility facilitates setup with an integrated webserver and intuitive browser-based UI, including real-time control with signal and thermal monitoring
- Opti-voice paging provides a smooth transition between music and announcements
- Integrated features to simplify commercial installations: Dedicated input for 600-ohm telephone or mic paging, independent 600-ohm music-on-hold and line-level aux outputs, and a NO/NC mute connection
POWERSPACE P2600A 230V EU
- 600 watts per channel and compatible with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems
- Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure
- Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging
- I-Share output delivers 2x power level by combining the current of both channels
- Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns
POWERSOFTX8 DSP+DANTE
- 1600 Watts per Channel @ 8 Ohms
- 3000 Watts per Channel @ 4 Ohms
- 5200 Watts per Channel @ 2 Ohms
- Channel Routing System, 3 Phase Power Supply
- Full Featured DSP, 2U Rack Space
POWERSOFT,X4 DSP+DANTE
- 1600 Watts per Channel @ 8 Ohms
- 3000 Watts per Channel @ 4 Ohms
- 5200 Watts per Channel @ 2 Ohms