ตู้ลำโพง ยี่ห้อ Electro-Voice(EV) รุ่น ZX3-60PIW

The Electro-Voice Zx3-60pi is the new standard of no compromise audio performance and versatility in a simple to use, compact package. The Electro-Voice Zx3-60pi features a molded polymer enclosure that is inherently water resistant. The addition of a multilayer grille with hydrophobic cloth and a gland nut input connection allows for a highly weather resistant system.

At its heart are the transducers. First is the DVX3121 high performance low frequency transducer. Electro-Voice used advanced computer aided design techniques to create forced air, directional voice coil cooling for high power and efficiency. Finite element analysis was used to optimize the suspension and magnetic structure for long, linear travel to provide low distortion and greater LF extension. These features and details, such as forged magnetic components and special materials, provide reliability with a 500W power rating in a lightweight transducer. Next is the ND2, a 2-inch voice coil compression driver based on neodymium motor structure to allow for maximum output while reducing size and weight to a minimum. Its precision phasing plug and titanium diaphragm provide better HF performance, while the integral heatsink provides cooling for high power output.

The high tech Electro-Voice Zx3-60pi enclosure uses injection-molded high-impact polypropylene structural foam to make the Electro-Voice Zx3-60pi incredibly durable. The enclosure geometry elements have been carefully designed to provide maximum rigidity and bass response. By design the Electro-Voice Zx3-60pi is also a perfect solution for stage monitors by allowing two angles (45° or 55°) without any additional accessories.

The Electro-Voice Zx3-60pi is equipped with two anchor plates for rigging with single studfittings, along with two more possible anchor plate attachment points on the bottom. For permanent suspension or attaching brackets, the Electro-Voice Zx3-60pi also has two M8 inserts on the top and bottom, two under the handle, and one on the back of the enclosure, for a total of 7.

Features

• DVX3121 12” LF Transducer with Forced Air Cooling
• ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver
• 60° x 60° Coverage Pattern
• 600W Continuous (2400W Peak) Power Handling
• 2 Conductor SJO Cable and Gland Nut
• High Sensitivity, 131 dB Maximum SPL
• Adjustable Monitor Angle (45° or 55°)
• 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points
• Color: Black
• All Weather IEC 529, IP44, & MIL810 Environmental Specs

SPECS:

• Freq. Response (-3 dB):  58 Hz – 15 kHz
• Freq. Response (-10 dB):  48 Hz – 20 kHz
• Rec HiPass Freq:  50 Hz
• Axial Sensitivity: 97 dB (1W/1m)
• Max SPL: 131 dB
• Horizontal Coverage: 60°
• Vertical Coverage: 60°
• Power Handling:  600W Continuous, 2,400W Peak
• LF Transducer:   DVX3121, 12″ Woofer (305mm) Driver
• HF Transducer:  ND2, 1-inch (25.4mm) Exit Neodymium Compression Driver
• Crossover Frequency:2.0 kHz
• Nominal Impedance:      8 Ohms
• Minimum Impedance:   6.2 Ohms
• Connector:  2 Conductor SJO Cable and Gland Nut
• Enclosure Material:    Polypropolene Structural Foam
• Suspension:  Enclosure has locations for 4 Single-Stud Attachment Plates and 10 Forged Steel Eyebolts – 2 on Top, 2 on Bottom, 2 on Side, and 1 on Rear of Enclosure
• Grille:    Polyester Powder Coated, 16GA. Galvanized Steel with Rotatable Logo.
• Environmental Spec:       IEC 529 IP24 / IP44
• Color:    Black
• Dim (H x W x D):  24.14″ x 15.64″ x 14.26″ (613 x 397 x 362 mm)
• Net Weight:   43.7 lbs (19.8 kg)
• Shipping Weight:  48.6 lbs (22.1 kg)