RU-2002

  • Microphone pre-amplifier for microphones with DIN plug
  • Talk switch activates relay contact
  • Balanced low impedance 1-volt audio output allows long cable runs
  • Volume control on front
  • 4 built-in chimes (selectable)
  • Chime volume control on front

 

 

SX-2000AO

  • 8 line level audio outputs, 2 local audio inputs can be mixed to individual outputs
  • 8 control inputs and 8 control outputs
  • Two LAN ports for redundancy of the transmission path
  • Analogue bypass in case of a CPU failure enables simultaneous all-zone calls
  • Audio output levels (post-fader levels) indicated on the level meters separate for each output channel
  • Volumes adjustable for each channel by front volume controls or by the SX-2000 software

 

SX-2100AI

  • Audio input unit
  • Two to 8 audio inputs by different input modules per unit
  • Up to 8 units can be installed in a centralised or decentralised system
  • Audio input levels (post-fader levels) are indicated on the level meters provided for each input channel

 

SX-2100AO

  • 8 audio outputs for system amplifiers
  • 8 control inputs and 8 control outputs
  • 1 SX-2000CI Control Input Unit and 1 SX-2000CO Control Output Unit can be connected
  • Two local audio inputs with control inputs are provided for broadcasting to any zone of this unit
  • Automatic switch over to a standby amplifier

 

TA-102 H

  • Power Source 220 – 240 V AC, 50/60 Hz
  • Power Consumption 30 W
  • Rated Output 10 W
  • Distortion Under 3% (1 kHz, rated output)

 

VM-2120 H

  • Programmable system management amplifier
  • 120 W
  • 5 switchable high impedance speaker zones with adjustable attenuators
  • 9 units can be combined to increase the output power and number of zones

 

VM-3240E CE

  • Expansion unit for VM-3000 System management amplifier, up to 9 extension possible
  • 240 W rated output
  • 6 speaker line outputs

 

VM-3240VA CE

  • Power Source : 230 V AC, 50/60 Hz
  • 230 V AC, 50/60 Hz : 600 W (with rated output signal), 260 W (according to EN60065)
  • Rated Output : 240 W

 

VM-3240VA CE

  • เป็นเครื่องผสมสัญญาณเสียง 240 วัตต์ 
  • สามารถเลือกโซนประกาศได้ไม่น้อยกว่า 6 โซน (สามารถขยายได้ถึง 60 โซน)แต่ละโซนมี Volume ปรับเพิ่มลดเสียงได้
  • มีช่องต่อ Remote Microphone (RM-200M S) 2 ช่องแบบ RJ45
  • สามารถใช้ร่วมกับ Remote Microphone ได้ถึง 4 เครื่องโดยใช้สาย CAT5 ได้ไม่น้อยกว่า 800 เมตร
  • มีช่องรับสัญญาณ 6 ช่อง (3Mic/ Line, 2BGM และ input 4)
  • มีช่องต่อสัญญาณฉุกเฉิน Emergency Control เพื่อเชื่อมต่อกับ Fire Alarm
  • มีช่องเชื่อมต่อ ATT Control เพื่อ By Pass Volume ไม่น้อยกว่า 6 Contact
  • สามารถประกาศเฉพาะโซนที่ต้องการโดยมีเสียงเพลงในโซนอื่นๆได้โดยเพิ่ม BGM AMP (Ext,PA Amp)
  • มีสวิตซ์กดสัญญาณเตือนภัย (Emergenvy) และไมโครโฟนประกาศฉุกเฉินหน้าเครื่อง
  • สามารถบันทึกข้อความได้ 6 ข้อความและข้อความฉุกเฉินได้ได้ 2 ข้อความโดยมี Memory ตัวเครื่อง
  • ตอบสนองความถี่ได้ไม่น้อยกว่า 50-20,000 Hz, ±3 dB
  • ใช้ได้ทั้งระบบไฟ AC 220V และ DC 24V
  • สามารถเชื่อมต่อกับคอมพิวเตอร์เพื่อการตั้งค่า Amplier ในการลง Software (FREE) 

VM-3360E CE

  • มีกำลังขับ  360 วัตต์
  • สามารถเลือกโซนประกาศได้ไม่น้อยกว่า 6 โซน แต่ละโซนมี Volume ปรับเพิ่มลดเสียงได้ สามารถเพิ่มได้ไม่เกิน 9 เครื่อง
  • มีช่องต่อ VM LINK ไม่น้อยกว่า 2 ช่องแบบ RJ45
  • มีช่องรับสัญญาณ Input ไม่น้อยกว่า 1 ช่อง

 

VP-1061 301H

  • TOA VP-1061 301H Power Source AC: 230 V AC, 50/60 Hz DC: 24 V DC
  • TOA VP-1061 301H Power Consumption AC: 170 W (at rated output), 100 W (EN60065), 14 W (no-signal) DC: 4.5 A (at rated output), 0.1 A (no-signal)
  • TOA VP-1061 301H Rated Output 60 W

 

VP-1121 301H

  • Power Source : AC: 230 V AC, 50/60 Hz , DC: 24 V DC
  • Rated Output : 60 W
  • Impedance : 167 Ω (100 V)