PoE Switch ยี่ห้อ H3C รุ่น LS-5560S-52S-SI-GL
specification
| Item | S5560S-28P-SI | S5560S-52P-SI | S5560S-28S-SI | S5560S-52S-SI |
| Box switching capacity | 598Gbps | |||
| Port switching capacity | 56Gbps | 104Gbps | 128Gbps | 176Gbps |
| Packet forwarding rate | 42Mpps | 78Mpps | 96Mpps | 132Mpps |
| CPU | 1 Core, 800MHz | |||
| Dimensions (H × W × D) | 43.6 × 440 × 160 mm | 43.6 × 440 × 230 mm | 43.6 × 440 × 160 mm | 43.6 × 440 × 230 mm |
| Weight | < 2.5 kg | < 3.5 kg | < 2.5 kg | < 3.5 kg |
| Management Ethernet ports | 1 console port | |||
| SDRAM/Flash | 512MB/256MB | |||
| Maximum stacking num | 9 | |||
| Stacking bandwidth | 16Gbps | 80Gbps | ||
| Service ports | 24 × 10/100/1000Base-T autosensing Ethernet ports4 × SFP ports | 48 × 10/100/1000Base-T autosensing Ethernet ports4 × SFP ports | 24 × 10/100/1000Base-T autosensing Ethernet ports4 × 10G SFP+ ports | 48× 10/100/1000Base-T autosensing Ethernet ports4 × 10G SFP+ ports |
| Power consumption | MIN: AC 9WMAX: AC 23W | MIN: AC 18WMAX: AC 41W | MIN: AC 10WMAX: AC 24W | MIN: AC 19WMAX: AC 44W |
| Operating temperature | 0ºC to 45ºC (32°F to 113°F) | |||
| Operating humidity | 10% RH to 90% RH, non-condensing | |||
| Link aggregation | 1G/10G port aggregationStatic aggregation
Dynamic aggregation Multichassis link aggregation |
|||
| Jumbo frame | 10,000 byte | |||
| MAC address table | Blackhole MAC addressMAC learning limit | |||
| Flow control | 802.3x flow control and half-duplex backpressure | |||
| VLAN | Port-based VLANQinQ
Voice VLAN MAC VLAN |
|||
| ARP | ARP DetectionARP speed limit | |||
| ND | Supported | |||
| VLAN virtual port | Supported | |||
| DHCP | DHCP ClientDHCP Snooping
DHCP Relay DHCP Server DHCP Option82 |
|||
| DNS | Static and Dynamic DNSIPV4 and IPV6 | |||
| Routing protocols | IPV4/IPV6 static routingRIP/RIPng, OSPFV1/V2/V3 | |||
| Strom suppression | Storm suppression based on port bandwidth percentageStorm suppression based on PPS
Storm suppression based on BPS Broadcast traffic/Multicast traffic/Unknown unicast traffic suppression |
|||
| Layer 2 ring network protocol | STP/RSTP/MSTPSTP Root Protection
Smart Link RRPP |
|||
| Mirroring | Flow mirroringPort mirroring | |||
| QoS/ACL | Packet filterFlexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR
Bidirectional ACL Port-based speed limiting Flow redirection Time-range 802.1p priority mapping and DSCP priority mapping |
|||
| Layer 2 ring network protocol | STP/RSTP/MSTP/PVST+/RPVST+STP Root Protection
Smart Link RRPP |
|||
| Multicast | IGMP Snooping v1/v2/v3 and MLD Snooping v1/v2IGMP v1/v2/v3 and PIM-SM/PIM-SSM/PIM-DM | |||
| Securityl | Hierarchical user management and password protectionMAC-based authentication
802.1X authentication RADIUS authentication, HWTACACS authentication SSH2.0 Port isolation Port security IP source guard Dynamic ARP detection BPDU guard and root guard HTTPs l EAD |
|||
| Loading and upgrading | Loading and upgrading through FTP/TFTP | |||
| Management and maintenance | Configuration from CLILogin through Telnet, and the console port
Simple Network Management Protocol (SNMP) Remote Monitoring (RMON) IMC network management system WEB management System log Alarming based on severity IRF2 NTP LLDP, LLDP-MED Sflow Debugging information output Telnet-based remote maintenance NQA DLDP Virtual Cable Test Loopback detection |
|||
Reviews
There are no reviews yet.