SX-2000AO
- 8 line level audio outputs, 2 local audio inputs can be mixed to individual outputs
- 8 control inputs and 8 control outputs
- Two LAN ports for redundancy of the transmission path
- Analogue bypass in case of a CPU failure enables simultaneous all-zone calls
- Audio output levels (post-fader levels) indicated on the level meters separate for each output channel
- Volumes adjustable for each channel by front volume controls or by the SX-2000 software
RU-2002
- Microphone pre-amplifier for microphones with DIN plug
- Talk switch activates relay contact
- Balanced low impedance 1-volt audio output allows long cable runs
- Volume control on front
- 4 built-in chimes (selectable)
- Chime volume control on front
RU-2001
- Microphone pre-amplifier for microphones with DIN plug
- Talk switch activates relay contact
- Balanced low impedance 1-volt audio output allows long cable runs
- Volume control on front
PP-025B
- 3-input-groups (total 8 inputs with individual level control), 2 × Line out, 1 × Recording out.
- 2 inputs accept microphone level -2dBv/ -62dBv selectable).
- 2 inputs accept auxiliary level (one of them is -2dBv/-22dBv selectable).
- Bass and treble tone control (+/-10dB at 100Hz and 10kHz).
P-3248D-AS
- POWER SOURCE : 100 – 240 V AC, 50/60Hz or 24 V DC
- RATED OUTPUT : 480 W
- POWER CONSUMPTION : 99 W (AC operation at 1/8 maximum output without clip)
P-2240 H
- Power Source : 220 – 240 V AC, or 24 – 30 V DC
- Rated Output : 240 W
- Frequency Response : 50 – 20,000 Hz (±3 dB)
P-924MK2 HH
- Type : Power amplifier
- Power Requirement : AC mains, 220 – 230/240 V, 50/60 Hz
- Power Consumption : 490 VA
P-912MK2 HH
- Type : Power amplifier
- Power Requirement : AC mains, 120 V, 60 Hz
- Power Consumption : 180 W
P-912MK2 HH
- Type : Power amplifier
- Power Requirement : AC mains, 120 V, 60 Hz
- Power Consumption : 180 W
MM-700F
- Power Source : 100 – 240V AC, 50/60Hz
- Power Consumption : 9 W or less (standby)
- Frequency Response : 20Hz – 20 kHz (-3 dB / + 1 dB)
MA-725F
- Power Source : 100 – 240 V AC, 50/60 Hz
- Total Harmonic Distortion : 0.5 % or less, at 1kHz, rated output
- Certification : cULus 60065, EN60065, EN55032, EN55020, FCC part15 class A
IP-100XI
- Frequency Response : LINE OUT (MP3/Smapling Frequency: 44k): 40Hz-15kHz
- Amplifier Audio Signal Output : Range: 1V rms, unbalanced 600Ω
- Amplifier Muting Control Output :High impedance, max, sink current: 10mA,withstand voltage : 24V DC