P-924MK2 HH
- Type : Power amplifier
- Power Requirement : AC mains, 220 – 230/240 V, 50/60 Hz
- Power Consumption : 490 VA
P-2240 H
- Power Source : 220 – 240 V AC, or 24 – 30 V DC
- Rated Output : 240 W
- Frequency Response : 50 – 20,000 Hz (±3 dB)
P-3248D-AS
- POWER SOURCE : 100 – 240 V AC, 50/60Hz or 24 V DC
- RATED OUTPUT : 480 W
- POWER CONSUMPTION : 99 W (AC operation at 1/8 maximum output without clip)
PP-025B
- 3-input-groups (total 8 inputs with individual level control), 2 × Line out, 1 × Recording out.
- 2 inputs accept microphone level -2dBv/ -62dBv selectable).
- 2 inputs accept auxiliary level (one of them is -2dBv/-22dBv selectable).
- Bass and treble tone control (+/-10dB at 100Hz and 10kHz).
RU-2001
- Microphone pre-amplifier for microphones with DIN plug
- Talk switch activates relay contact
- Balanced low impedance 1-volt audio output allows long cable runs
- Volume control on front
RU-2002
- Microphone pre-amplifier for microphones with DIN plug
- Talk switch activates relay contact
- Balanced low impedance 1-volt audio output allows long cable runs
- Volume control on front
- 4 built-in chimes (selectable)
- Chime volume control on front
SX-2000AO
- 8 line level audio outputs, 2 local audio inputs can be mixed to individual outputs
- 8 control inputs and 8 control outputs
- Two LAN ports for redundancy of the transmission path
- Analogue bypass in case of a CPU failure enables simultaneous all-zone calls
- Audio output levels (post-fader levels) indicated on the level meters separate for each output channel
- Volumes adjustable for each channel by front volume controls or by the SX-2000 software
SX-2100AI
- Audio input unit
- Two to 8 audio inputs by different input modules per unit
- Up to 8 units can be installed in a centralised or decentralised system
- Audio input levels (post-fader levels) are indicated on the level meters provided for each input channel
SX-2100AO
- 8 audio outputs for system amplifiers
- 8 control inputs and 8 control outputs
- 1 SX-2000CI Control Input Unit and 1 SX-2000CO Control Output Unit can be connected
- Two local audio inputs with control inputs are provided for broadcasting to any zone of this unit
- Automatic switch over to a standby amplifier
TA-102 H
- Power Source 220 – 240 V AC, 50/60 Hz
- Power Consumption 30 W
- Rated Output 10 W
- Distortion Under 3% (1 kHz, rated output)
VM-2120 H
- Programmable system management amplifier
- 120 W
- 5 switchable high impedance speaker zones with adjustable attenuators
- 9 units can be combined to increase the output power and number of zones
VM-3240E CE
- Expansion unit for VM-3000 System management amplifier, up to 9 extension possible
- 240 W rated output
- 6 speaker line outputs