SPA2-200
- Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads.
- ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost.
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-200 will deliver up to 350 watts into 70V or 100V when bridged.
SPA2-60
- Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads
- ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.
- Bridgeable outputs for higher power — Bridging the outputs of the SPA2-60 and SPA4-60 provide up to 200 watts into low impedance, and up to 250 watts into 70V or 100V providing outstanding flexibility.
SPA4-100
- Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA4-100 model are designed to provide up to 100 watts per channel into Low-Z loads.
- ENERGY STAR® qualified amplifier – The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost.
- Bridgeable outputs for higher power — Bridgeable outputs for higher power – Bridging the outputs of the SPA4-100 will deliver up to 350 watts into 70V or 100V when bridged.
SX-2000AO
- 8 line level audio outputs, 2 local audio inputs can be mixed to individual outputs
- 8 control inputs and 8 control outputs
- Two LAN ports for redundancy of the transmission path
- Analogue bypass in case of a CPU failure enables simultaneous all-zone calls
- Audio output levels (post-fader levels) indicated on the level meters separate for each output channel
- Volumes adjustable for each channel by front volume controls or by the SX-2000 software
SX-2100AI
- Audio input unit
- Two to 8 audio inputs by different input modules per unit
- Up to 8 units can be installed in a centralised or decentralised system
- Audio input levels (post-fader levels) are indicated on the level meters provided for each input channel
SX-2100AO
- 8 audio outputs for system amplifiers
- 8 control inputs and 8 control outputs
- 1 SX-2000CI Control Input Unit and 1 SX-2000CO Control Output Unit can be connected
- Two local audio inputs with control inputs are provided for broadcasting to any zone of this unit
- Automatic switch over to a standby amplifier
T10
- Bridge parallel mono stereo mode
- Selectable input sensitivity: 0.775V and 1.4V
- RCA and XLR input connectors; Output Speakon
- 2 gain controls, 1 power switch, 1 power LED, 2 groups of 6 LEDs respectively match
- Working Channel, Cut-Off and Fault Status
- Class H Amplifiers
- 220V Voltage
T3
- โหมดสเตอริโอและโมโน
- ความไวอินพุตที่เลือกได้: 0.775V และ 1.4V
- ช่องอินพุต RCA และ XLR ช่องเอาต์พุต Speakon
T5
- Bridge parallel mono stereo mode
- Selectable input sensitivity: 0.775V and 1.4V
- RCA and XLR input connectors; Output Speakon
- 2 gain controls, 1 power switch, 1 power LED, 2 groups of 6 LEDs respectively match
- Channel at work, cut and fault status
- Class H amplifiers
- Voltage 220V
T7
- การตอบสนองความถี่ : 20Hz-20kHz, + 0 / -1dB
- ความเพี้ยนรวม (THD) : <0.5%, 20Hz-20kHz
- การบิดเบือนแบบมอดูเลต : = / <0.35%
TA-102 H
- Power Source 220 – 240 V AC, 50/60 Hz
- Power Consumption 30 W
- Rated Output 10 W
- Distortion Under 3% (1 kHz, rated output)
